Ina Occasional Chenille Chair Caramel
- Description
- Features
- Specification
- Dimensions
- Warranty
- Shipment Contains
- FAQs
Curl up in the Ina a curved occasional chair in warm caramel chenille, with a sculptural barrel back and a low, grounded stance. At 79 cm wide by 89 cm deep, it pairs beside a sofa or anchors a reading corner in a layered lounge or bedroom.
Crafted with an FSC-certified pine and plywood frame, with high-density foam and fibre cushioning, S-springs and webbing for support. Upholstered in textured chenille and finished with solid ash timber legs. Fully assembled.
Curved, low-slung silhouette
A rounded backrest wraps into shaped arms, giving the chair a sculptural profile from every angle. The seat sits 45 cm off the floor on 14.6 cm ash legs a low, loungey perch that still stands up easily.
FSC-certified frame, fully assembled
High-density foam with fibre cushioning over S-spring suspension and elastic webbing, rated to 150 kg. The solid ash timber legs arrive fitted, so the chair is ready to place straight from the carton.
Caramel chenille warm and grounded
The CRUX fabric is a textured chenille in a rich caramel tone (88% polyester, 12% acrylic). The caramel reads warm against cream walls, walnut timber and brass a classic, layered palette that carries the room.
- Sculptural curved silhouette 79 cm wide by 89 cm deep
- High-density foam and fibre cushioning over S-springs and webbing
- FSC-certified pine and plywood frame
- Textured chenille upholstery (CRUX weave) in warm Caramel
- Also available in Natural and Black chenille
- Solid ash timber legs
- Fully assembled no tools required
- Rated to 150 kg
- Structural Frame: FSC-certified pine and plywood
- Seating Support: S-springs and webbing
- Cushioning: high-density foam and fibre
- Upholstery: textured chenille (CRUX weave), 88% polyester / 12% acrylic
- Colour (this listing): Caramel
- Also available in: Natural, Black
- Legs: solid ash timber, 14.6 cm
- Max weight capacity: 150 kg
- Assembly: fully assembled
| Overall | W79 × D89 × H73 cm |
|---|---|
| Seat width | 76 cm |
| Seat depth | 60 cm |
| Seat height | 45 cm |
| Leg height | 14.6 cm |
| Product weight | 21.7 kg |
| Max weight capacity | 150 kg |
Comfort at a glance: Firmness 3/5 (medium) · Seat height low (45 cm).
1 Year warranty.
1 chair per carton
Carton: 79 × 92 × 76.5 cm, 32 kg
Fully assembled.
Will the Ina fit through a standard Australian doorway?
The Ina ships as a single carton, 79 × 92 × 76.5 cm. Standard Australian internal doorways are 820 mm wide the carton's widest face is 920 mm (92 cm), so check the doorway width, hallway corners and any lift before ordering.
How firm is the seat?
Medium. On a 1 5 scale where 1 is very soft and 5 is firm, the Ina sits around a 3. High-density foam and fibre cushioning over S-springs and webbing gives a supportive seat with a soft top layer.
What's the frame made of?
An FSC-certified pine and plywood frame, with S-springs and webbing across the base. Cushioning is high-density foam and fibre. Legs are solid ash timber.
How do I care for the chenille?
Treat spills and stains promptly by blotting with a clean, dry cloth. Avoid rubbing, and cut loose threads rather than pulling them. Keep the chair out of direct sunlight and away from heat sources to prevent fading, and vacuum regularly to maintain the fabric. Slight colour variation may occur between dye lots.
Description
- Description
- Features
- Specification
- Dimensions
- Warranty
- Shipment Contains
- FAQs
Curl up in the Ina a curved occasional chair in warm caramel chenille, with a sculptural barrel back and a low, grounded stance. At 79 cm wide by 89 cm deep, it pairs beside a sofa or anchors a reading corner in a layered lounge or bedroom.
Crafted with an FSC-certified pine and plywood frame, with high-density foam and fibre cushioning, S-springs and webbing for support. Upholstered in textured chenille and finished with solid ash timber legs. Fully assembled.
Curved, low-slung silhouette
A rounded backrest wraps into shaped arms, giving the chair a sculptural profile from every angle. The seat sits 45 cm off the floor on 14.6 cm ash legs a low, loungey perch that still stands up easily.
FSC-certified frame, fully assembled
High-density foam with fibre cushioning over S-spring suspension and elastic webbing, rated to 150 kg. The solid ash timber legs arrive fitted, so the chair is ready to place straight from the carton.
Caramel chenille warm and grounded
The CRUX fabric is a textured chenille in a rich caramel tone (88% polyester, 12% acrylic). The caramel reads warm against cream walls, walnut timber and brass a classic, layered palette that carries the room.
- Sculptural curved silhouette 79 cm wide by 89 cm deep
- High-density foam and fibre cushioning over S-springs and webbing
- FSC-certified pine and plywood frame
- Textured chenille upholstery (CRUX weave) in warm Caramel
- Also available in Natural and Black chenille
- Solid ash timber legs
- Fully assembled no tools required
- Rated to 150 kg
- Structural Frame: FSC-certified pine and plywood
- Seating Support: S-springs and webbing
- Cushioning: high-density foam and fibre
- Upholstery: textured chenille (CRUX weave), 88% polyester / 12% acrylic
- Colour (this listing): Caramel
- Also available in: Natural, Black
- Legs: solid ash timber, 14.6 cm
- Max weight capacity: 150 kg
- Assembly: fully assembled
| Overall | W79 × D89 × H73 cm |
|---|---|
| Seat width | 76 cm |
| Seat depth | 60 cm |
| Seat height | 45 cm |
| Leg height | 14.6 cm |
| Product weight | 21.7 kg |
| Max weight capacity | 150 kg |
Comfort at a glance: Firmness 3/5 (medium) · Seat height low (45 cm).
1 Year warranty.
1 chair per carton
Carton: 79 × 92 × 76.5 cm, 32 kg
Fully assembled.
Will the Ina fit through a standard Australian doorway?
The Ina ships as a single carton, 79 × 92 × 76.5 cm. Standard Australian internal doorways are 820 mm wide the carton's widest face is 920 mm (92 cm), so check the doorway width, hallway corners and any lift before ordering.
How firm is the seat?
Medium. On a 1 5 scale where 1 is very soft and 5 is firm, the Ina sits around a 3. High-density foam and fibre cushioning over S-springs and webbing gives a supportive seat with a soft top layer.
What's the frame made of?
An FSC-certified pine and plywood frame, with S-springs and webbing across the base. Cushioning is high-density foam and fibre. Legs are solid ash timber.
How do I care for the chenille?
Treat spills and stains promptly by blotting with a clean, dry cloth. Avoid rubbing, and cut loose threads rather than pulling them. Keep the chair out of direct sunlight and away from heat sources to prevent fading, and vacuum regularly to maintain the fabric. Slight colour variation may occur between dye lots.
